Recondition Your Own Batteries

Toyota Plug-In Prius (PHEV)

Among “green” car owners, the OEM plug-in hybrid, or “PHEV”, is seen as the next evolutionary step in auto efficiency.

PHEV’s plug into a source of electricity to recharge their batteries, then travel on pure electric power for a distance and get fuel efficiency ratings in the 100+ MPG range afterwards, thus reducing gasoline consumption, and significantly reducing pollution as well (even when the electricity comes from coal plants).Prius Conversion Juiced Hybrids plug-in hybrid upgrade includes twenty PbA20-12 lead-acid batteries plus all high voltage components and control electronics in a secure welded steel enclosure. The enclosure fits beneath the trunk deck and above the spare tire so no trunk space is lost. Additionally, hydraulic shocks allow the enclosure to pivot out of the way for easy spare tire access. This battery pack gives you about 10 miles of all electric driving. Contact Us For Pricing and Installation Options.

www.juicedhybrid.com

Duration : 0:1:44

Read more… »

Technorati Tags: , , , , , , , , , , ,

Toyota Plug-In Prius (PHEV)

Among “green” car owners, the OEM plug-in hybrid, or “PHEV”, is seen as the next evolutionary step in auto efficiency.

PHEV’s plug into a source of electricity to recharge their batteries, then travel on pure electric power for a distance and get fuel efficiency ratings in the 100+ MPG range afterwards, thus reducing gasoline consumption, and significantly reducing pollution as well (even when the electricity comes from coal plants).Prius Conversion Juiced Hybrids plug-in hybrid upgrade includes twenty PbA20-12 lead-acid batteries plus all high voltage components and control electronics in a secure welded steel enclosure. The enclosure fits beneath the trunk deck and above the spare tire so no trunk space is lost. Additionally, hydraulic shocks allow the enclosure to pivot out of the way for easy spare tire access. This battery pack gives you about 10 miles of all electric driving. Contact Us For Pricing and Installation Options.

www.juicedhybrid.com

Duration : 0:1:44

Read more… »

Technorati Tags: , , , , , , , , , , ,

Toyota Plug-In Prius (PHEV)

Among “green” car owners, the OEM plug-in hybrid, or “PHEV”, is seen as the next evolutionary step in auto efficiency.

PHEV’s plug into a source of electricity to recharge their batteries, then travel on pure electric power for a distance and get fuel efficiency ratings in the 100+ MPG range afterwards, thus reducing gasoline consumption, and significantly reducing pollution as well (even when the electricity comes from coal plants).Prius Conversion Juiced Hybrids plug-in hybrid upgrade includes twenty PbA20-12 lead-acid batteries plus all high voltage components and control electronics in a secure welded steel enclosure. The enclosure fits beneath the trunk deck and above the spare tire so no trunk space is lost. Additionally, hydraulic shocks allow the enclosure to pivot out of the way for easy spare tire access. This battery pack gives you about 10 miles of all electric driving. Contact Us For Pricing and Installation Options.

www.juicedhybrid.com

Duration : 0:1:44

Read more… »

Technorati Tags: , , , , , , , , , , ,

http://Water4GasSystems.net – water Car Conversion – How to Build Your Own water Powered Car the Easy Way!

Converting your car to run on waterity is a great way to save money on gas and protect the environment at the same time. Of course if you have enough money you can buy a hybrid car, but if you don’t turning your own vehicle into a hybrid is the next best thing.

Here are only some of the advantages of building your own EV:

* You can slash your gas costs to zero and save hundreds of dollars every month.
* You will reduce your maintenance costs.
* You will receive tax credits for the IRS for driving a clean fuel vehicle.
* You will stop emitting greenhouse gas and toxic fumes and help reduce global warming.
* You will be able to reach speeds of 50 miles per hour.
* You can get a better engine’s performance.
* You will be able to drive up to 150-200 miles on a single charge.

Most vehicles can be converted to run on waterity, but it would be better to choose a car that has a light weight and has enough room for batteries. The first thing you need to do is to remove the gas engine parts and install the water motor. Some of the materials you are going to need are: rechargeable batteries, various nuts and bolts, fuses, a power controller and power conductors. These parts can be found at any hardware store and are very affordable. If you hire a mechanic to retrofit your automobile, you will need to pay him $3000-$8000. But if you decide to do it yourself, the cost for the conversion will be less than $300 and will pay for itself in a couple of months.

There are some water vehicle conversion kits online that can provide you with step-by-step instructions, which will help you build your own EV in only a few hours.

These manuals will also show you how to get the necessary equipment at a very low cost or even for free!

Do you want to do an water CAR CONVERSION? To build your own water powered car, just Click Here
Water Car Conversion – How to Build Your Own Water Powered Car the Easy Way!

Duration : 0:5:28

Read more… »

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

http://Water4GasSystems.net – water Car Conversion – How to Build Your Own water Powered Car the Easy Way!

Converting your car to run on waterity is a great way to save money on gas and protect the environment at the same time. Of course if you have enough money you can buy a hybrid car, but if you don’t turning your own vehicle into a hybrid is the next best thing.

Here are only some of the advantages of building your own EV:

* You can slash your gas costs to zero and save hundreds of dollars every month.
* You will reduce your maintenance costs.
* You will receive tax credits for the IRS for driving a clean fuel vehicle.
* You will stop emitting greenhouse gas and toxic fumes and help reduce global warming.
* You will be able to reach speeds of 50 miles per hour.
* You can get a better engine’s performance.
* You will be able to drive up to 150-200 miles on a single charge.

Most vehicles can be converted to run on waterity, but it would be better to choose a car that has a light weight and has enough room for batteries. The first thing you need to do is to remove the gas engine parts and install the water motor. Some of the materials you are going to need are: rechargeable batteries, various nuts and bolts, fuses, a power controller and power conductors. These parts can be found at any hardware store and are very affordable. If you hire a mechanic to retrofit your automobile, you will need to pay him $3000-$8000. But if you decide to do it yourself, the cost for the conversion will be less than $300 and will pay for itself in a couple of months.

There are some water vehicle conversion kits online that can provide you with step-by-step instructions, which will help you build your own EV in only a few hours.

These manuals will also show you how to get the necessary equipment at a very low cost or even for free!

Do you want to do an water CAR CONVERSION? To build your own water powered car, just Click Here
Water Car Conversion – How to Build Your Own Water Powered Car the Easy Way!

Duration : 0:5:28

Read more… »

Technorati Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,